Cameras Trap for Bats

{"id":6552401739879,"title":"Bat Roost Survey Camera Bracket or Stand","handle":"bat-roost-survey-kit","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is a camera trap system for remote surveys for bat presence, intended to be used to monitor bat houses. Note due to fast changing advances in trail cameras, the camera must be sourced separately. Certain trail cameras will trigger on the heat of an animal investigating the bat house. The camera is particularly effective when a bat makes multiple passes before entering a roosts, such as is typical in the morning hours. The first bat pass will sometimes activate the camera, but will usually be too fast to be recorded. Usually within ~15 seconds the bat returns and will be recorded. We have come up with two different mounting options:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eOption 1; The Bracket System.\u003c\/strong\u003e This  consists of a camera trap mounted to a bracket, which is clamped to the post the bat house is attached to. \u003c\/span\u003eThe purpose of the bracket is to get the camera a few feet below the bottom of a bat house, and ~6' horizontially from the bottom of the bat house. The height is required to prevent unnecessary upward tilt of the camera, which will result with dew collecting on the lens and producing undesirable \"foggy\" video. The horizontal distance has been shown in BCM tests to produce reliable triggers on certain trail cameras from small bats. A small stepladder or 3 step stool will be helpful for installing and servicing. The bracket arms can be unscrewed to help retrieve the camera or for transport if desired. A full size stepladder and an assistant may be helpful to initially frame the camera. The mounting bracket will clamp to any square or rectangular post of any size. The clamp may attach to round posts up to 2'' in diameter, but may spin\/move on the post in windy conditions. \u003cspan data-mce-fragment=\"1\"\u003eThis bracket might be a deterrent to vandals, who might otherwise need a ladder to fool with your survey.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption 2; Camera Stand.\u003c\/strong\u003e This is a black aluminum telescopic 5- section extension stand that extends to 15'. It features heavy duty pneumatic dampening which helps avoid sudden collapses. Overall size collapsed is 46.6x5.5x4.4 inches and weighs 9 lbs. The mount at the top has a standard 1\/4-20 camera thread stud and also 3\/8. A swivel adapter allows the camera be adjusted. 4- Sandbags are included for stability (source sand or other material locally). The advantage of this method is that it may be used for other sorts of surveys as the independent stand can be placed anywhere relatively flat and staked or sandbagged down. The camera is easier to retrieve\/setup and no ladder is necessary. There is no real way to lock down this setup and therefore it might be more prone to theft. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsiderations and Limitations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis bracket and any camera will sooner or later serve as a perch for potential bat predators and is not intended to be permanently installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eBats generally swoop into bat houses from the bottom, you may have better luck turning the camera vertically so the sensor covers that area more completely, but at the expense of videos being rotated 90°.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eA camera cannot be easily locked to a structure in this configuration; you might consider signage to deter vandalism or theft in highly visible areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eRecommended Camera Specifications. \u003cmeta charset=\"UTF-8\"\u003eThis camera is not wi-fi or cell network capable; recorded videos and photos must be downloaded from the onboard SD card. (Cameras are not sold by BCM, listed here for reference only):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpypoint Solar Dark; Trigger speed: 0.07 seconds; flash range: 90'; detection range: 110', still shot megapixels: 12, modes: photo, multi-shot, time-lapse, HD video; number of LEDs: 42; video definition: full HD (1080p); video sound, replaceable lithium-ion battery charged with built-in solar panel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is made-to-order item and may require 1-2 week lead time to ship after an order is placed. \u003c\/strong\u003e\u003cstrong\u003eThis item is non-returnable after 30 days.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2022-01-31T10:55:26-05:00","created_at":"2021-04-21T11:58:01-04:00","vendor":"Bat Conservation and Management, Inc.","type":"Capture Gear","tags":["Trail Camera"],"price":15000,"price_min":15000,"price_max":17500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39393624064103,"title":"Pole Clamp Bracket only - add your own camera","option1":"Pole Clamp Bracket only - add your own camera","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bat Roost Survey Camera Bracket or Stand - Pole Clamp Bracket only - add your own camera","public_title":"Pole Clamp Bracket only - add your own camera","options":["Pole Clamp Bracket only - add your own camera"],"price":15000,"weight":4536,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":39619491397735,"title":"Camera Stand + Sand Bags+ Swivel only - add your own camera","option1":"Camera Stand + Sand Bags+ Swivel only - add your own camera","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bat Roost Survey Camera Bracket or Stand - Camera Stand + Sand Bags+ Swivel only - add your own camera","public_title":"Camera Stand + Sand Bags+ Swivel only - add your own camera","options":["Camera Stand + Sand Bags+ Swivel only - add your own camera"],"price":17500,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9076copy.jpg?v=1625327023","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/camera-0369.jpg?v=1643650603","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9077copy.jpg?v=1643650603","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9081copy.jpg?v=1643650603","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9089copy.jpg?v=1643650603","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/TrailCamTest-1710.jpg?v=1643650603"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9076copy.jpg?v=1625327023","options":["Configuration"],"media":[{"alt":null,"id":20711800078439,"position":1,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9076copy.jpg?v=1625327023"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9076copy.jpg?v=1625327023","width":3024},{"alt":null,"id":21566887657575,"position":2,"preview_image":{"aspect_ratio":0.75,"height":3198,"width":2398,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/camera-0369.jpg?v=1643650603"},"aspect_ratio":0.75,"height":3198,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/camera-0369.jpg?v=1643650603","width":2398},{"alt":null,"id":20711800111207,"position":3,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9077copy.jpg?v=1643650603"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9077copy.jpg?v=1643650603","width":4032},{"alt":null,"id":20711800143975,"position":4,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9081copy.jpg?v=1643650603"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9081copy.jpg?v=1643650603","width":3024},{"alt":null,"id":20711800176743,"position":5,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9089copy.jpg?v=1643650603"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_9089copy.jpg?v=1643650603","width":3024},{"alt":null,"id":21566847189095,"position":6,"preview_image":{"aspect_ratio":1.498,"height":3012,"width":4512,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/TrailCamTest-1710.jpg?v=1643650603"},"aspect_ratio":1.498,"height":3012,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/TrailCamTest-1710.jpg?v=1643650603","width":4512},{"alt":"Trail Camera examples for bat surveys","id":21566911250535,"position":7,"preview_image":{"aspect_ratio":1.333,"height":360,"width":480,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/hqdefault_8e73ce63-8ff1-483d-886b-a366262c36c4.jpg?v=1643650827"},"aspect_ratio":1.77,"external_id":"mBEt8cNsvpI","host":"youtube","media_type":"external_video"},{"alt":"Trail Camera Survey for bat example","id":21566913413223,"position":8,"preview_image":{"aspect_ratio":1.333,"height":1932,"width":2576,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_6991copy2.jpg?v=1643651061"},"aspect_ratio":1.77,"external_id":"63zVqF8GQNI","host":"youtube","media_type":"external_video"}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is a camera trap system for remote surveys for bat presence, intended to be used to monitor bat houses. Note due to fast changing advances in trail cameras, the camera must be sourced separately. Certain trail cameras will trigger on the heat of an animal investigating the bat house. The camera is particularly effective when a bat makes multiple passes before entering a roosts, such as is typical in the morning hours. The first bat pass will sometimes activate the camera, but will usually be too fast to be recorded. Usually within ~15 seconds the bat returns and will be recorded. We have come up with two different mounting options:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eOption 1; The Bracket System.\u003c\/strong\u003e This  consists of a camera trap mounted to a bracket, which is clamped to the post the bat house is attached to. \u003c\/span\u003eThe purpose of the bracket is to get the camera a few feet below the bottom of a bat house, and ~6' horizontially from the bottom of the bat house. The height is required to prevent unnecessary upward tilt of the camera, which will result with dew collecting on the lens and producing undesirable \"foggy\" video. The horizontal distance has been shown in BCM tests to produce reliable triggers on certain trail cameras from small bats. A small stepladder or 3 step stool will be helpful for installing and servicing. The bracket arms can be unscrewed to help retrieve the camera or for transport if desired. A full size stepladder and an assistant may be helpful to initially frame the camera. The mounting bracket will clamp to any square or rectangular post of any size. The clamp may attach to round posts up to 2'' in diameter, but may spin\/move on the post in windy conditions. \u003cspan data-mce-fragment=\"1\"\u003eThis bracket might be a deterrent to vandals, who might otherwise need a ladder to fool with your survey.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption 2; Camera Stand.\u003c\/strong\u003e This is a black aluminum telescopic 5- section extension stand that extends to 15'. It features heavy duty pneumatic dampening which helps avoid sudden collapses. Overall size collapsed is 46.6x5.5x4.4 inches and weighs 9 lbs. The mount at the top has a standard 1\/4-20 camera thread stud and also 3\/8. A swivel adapter allows the camera be adjusted. 4- Sandbags are included for stability (source sand or other material locally). The advantage of this method is that it may be used for other sorts of surveys as the independent stand can be placed anywhere relatively flat and staked or sandbagged down. The camera is easier to retrieve\/setup and no ladder is necessary. There is no real way to lock down this setup and therefore it might be more prone to theft. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsiderations and Limitations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis bracket and any camera will sooner or later serve as a perch for potential bat predators and is not intended to be permanently installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eBats generally swoop into bat houses from the bottom, you may have better luck turning the camera vertically so the sensor covers that area more completely, but at the expense of videos being rotated 90°.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eA camera cannot be easily locked to a structure in this configuration; you might consider signage to deter vandalism or theft in highly visible areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eRecommended Camera Specifications. \u003cmeta charset=\"UTF-8\"\u003eThis camera is not wi-fi or cell network capable; recorded videos and photos must be downloaded from the onboard SD card. (Cameras are not sold by BCM, listed here for reference only):\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpypoint Solar Dark; Trigger speed: 0.07 seconds; flash range: 90'; detection range: 110', still shot megapixels: 12, modes: photo, multi-shot, time-lapse, HD video; number of LEDs: 42; video definition: full HD (1080p); video sound, replaceable lithium-ion battery charged with built-in solar panel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is made-to-order item and may require 1-2 week lead time to ship after an order is placed. \u003c\/strong\u003e\u003cstrong\u003eThis item is non-returnable after 30 days.\u003c\/strong\u003e\u003c\/p\u003e"}

{"id":6539006935143,"title":"Ravelli Tripod Pistol Grip Ball Head","handle":"ravelli-tripod-pistol-grip-ball-head","description":"\u003cp\u003eRavelli Tripod Pistol Grip Ball Head 8.5\"H Spirit Levels and Quick Release Plate Camera Mount\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have a quantity of these in brand new condition, removed from tripod legs that were used for another project. Sale is for the tripod head and one camera quick release plate  only.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eSimple to use camera mount that is instantly adjustable.  Just squeeze the large sized pistol grip trigger.  That releases the head to move in all directions including 90 degree angles. Quick release plate makes it easy to mount to your camera on the head.  And its just as simple to remove it. Click and friction locks will ensure that the quick release plate won't detach by mistake. Standard sized ball head screw mount, 2.25\" diameter base, and 8\" tall. The manufacturer suggests that the maximum supportable weight is 11 pounds.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eWill fit tripods with removable\/ interchangeable heads.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eIf you want ONLY the quick release plate, we have a small quantity available: https:\/\/batmanagement.com\/products\/ravelli-quick-release-plate-for-tripod-pistol-grip-ball-head\u003c\/span\u003e\u003c\/div\u003e","published_at":"2021-03-07T14:46:48-05:00","created_at":"2021-03-07T14:45:25-05:00","vendor":"Bat Conservation and Management, Inc.","type":"Electronics FROM Amazon","tags":["Cameras","Infrared Lights","Trail Camera"],"price":4000,"price_min":4000,"price_max":4000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39261145137255,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ravelli Tripod Pistol Grip Ball Head","public_title":null,"options":["Default Title"],"price":4000,"weight":1361,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-2.jpg?v=1615146327","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-3.jpg?v=1615146327","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-4.jpg?v=1615146327","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600.jpg?v=1615146327"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-2.jpg?v=1615146327","options":["Title"],"media":[{"alt":null,"id":20261335335015,"position":1,"preview_image":{"aspect_ratio":0.388,"height":1600,"width":621,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-2.jpg?v=1615146327"},"aspect_ratio":0.388,"height":1600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-2.jpg?v=1615146327","width":621},{"alt":null,"id":20261335367783,"position":2,"preview_image":{"aspect_ratio":0.474,"height":1600,"width":758,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-3.jpg?v=1615146327"},"aspect_ratio":0.474,"height":1600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-3.jpg?v=1615146327","width":758},{"alt":null,"id":20261335400551,"position":3,"preview_image":{"aspect_ratio":0.401,"height":1600,"width":642,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-4.jpg?v=1615146327"},"aspect_ratio":0.401,"height":1600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600-4.jpg?v=1615146327","width":642},{"alt":null,"id":20261335433319,"position":4,"preview_image":{"aspect_ratio":0.469,"height":1600,"width":750,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600.jpg?v=1615146327"},"aspect_ratio":0.469,"height":1600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/s-l1600.jpg?v=1615146327","width":750}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eRavelli Tripod Pistol Grip Ball Head 8.5\"H Spirit Levels and Quick Release Plate Camera Mount\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe have a quantity of these in brand new condition, removed from tripod legs that were used for another project. Sale is for the tripod head and one camera quick release plate  only.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eSimple to use camera mount that is instantly adjustable.  Just squeeze the large sized pistol grip trigger.  That releases the head to move in all directions including 90 degree angles. Quick release plate makes it easy to mount to your camera on the head.  And its just as simple to remove it. Click and friction locks will ensure that the quick release plate won't detach by mistake. Standard sized ball head screw mount, 2.25\" diameter base, and 8\" tall. The manufacturer suggests that the maximum supportable weight is 11 pounds.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eWill fit tripods with removable\/ interchangeable heads.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eIf you want ONLY the quick release plate, we have a small quantity available: https:\/\/batmanagement.com\/products\/ravelli-quick-release-plate-for-tripod-pistol-grip-ball-head\u003c\/span\u003e\u003c\/div\u003e"}

{"id":6540742099047,"title":"Ravelli Quick Release Plate for Tripod Pistol Grip Ball Head and other Ravelli","handle":"ravelli-quick-release-plate-for-tripod-pistol-grip-ball-head","description":"\u003cp\u003eRavelli APGL4 Pistol Grip Head Quick Release Plate Camera Mount\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e-Camera Quick Release Plate ONLY-\u003c\/p\u003e\n\u003cp\u003eWe have a quantity of these in brand new condition. Sale is for one camera quick release plate.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eWill fit \u003cspan data-mce-fragment=\"1\"\u003eRavelli APGL4 Pistol Grip Head or compatible head only. This quick release looks proprietary and probably doesn't fit other heads, especially if they aren't Ravelli.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFree shipping in Continental  US.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e","published_at":"2021-03-11T13:23:42-05:00","created_at":"2021-03-11T13:23:42-05:00","vendor":"Bat Conservation and Management, Inc.","type":"Electronics FROM Amazon","tags":["Cameras","Infrared Lights","Trail Camera"],"price":3500,"price_min":3500,"price_max":3500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39269192138855,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ravelli Quick Release Plate for Tripod Pistol Grip Ball Head and other Ravelli","public_title":null,"options":["Default Title"],"price":3500,"weight":113,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1488.jpg?v=1632343526","\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1490.jpg?v=1632343542"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1488.jpg?v=1632343526","options":["Title"],"media":[{"alt":null,"id":21030523437159,"position":1,"preview_image":{"aspect_ratio":1.333,"height":3024,"width":4032,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1488.jpg?v=1632343526"},"aspect_ratio":1.333,"height":3024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1488.jpg?v=1632343526","width":4032},{"alt":null,"id":21030523732071,"position":2,"preview_image":{"aspect_ratio":0.75,"height":4032,"width":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1490.jpg?v=1632343542"},"aspect_ratio":0.75,"height":4032,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/IMG_1490.jpg?v=1632343542","width":3024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eRavelli APGL4 Pistol Grip Head Quick Release Plate Camera Mount\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e-Camera Quick Release Plate ONLY-\u003c\/p\u003e\n\u003cp\u003eWe have a quantity of these in brand new condition. Sale is for one camera quick release plate.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003eWill fit \u003cspan data-mce-fragment=\"1\"\u003eRavelli APGL4 Pistol Grip Head or compatible head only. This quick release looks proprietary and probably doesn't fit other heads, especially if they aren't Ravelli.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan color=\"#002cfd\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFree shipping in Continental  US.\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e"}