{"id":377832079387,"title":"BatCam 12v Power Kit","handle":"copy-of-remote-monitoring-kit-batcam","description":"\u003cp class=\"style411\"\u003e This relatively inexpensive kit includes everything you need to spy on bats in your bat house (or any other critter in crevices or nest boxes) from over 100' away!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWatch bat activity in roost crevices\u003c\/li\u003e\n\u003cli\u003eBuilt in IR LED do not disturb bats\u003c\/li\u003e\n\u003cli\u003eCan be used to inspect any crevices to look for bats in bridges, rocks, trees \u003c\/li\u003e\n\u003cli\u003eCould be used to monitor inside bird houses, etc.\u003c\/li\u003e\n\u003cli\u003eHear audible bat calls (external mic recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"style411\"\u003eOur kit contains a\u003cspan\u003e ridiculously small camera with built in infrared LEDs for illumination in total darkness. A single cable carries SD quality footage, audio, and power over 100' to a live monitor, powered by a portable 12v power supply. Add the tiny in-line DVR to record activity, only when there is movement detected inside the bat house! We've designed this system to require as few wires as possible, and also have the ability to run long term remotely on a 12v battery or a 110v wall outlet. You can disconnect the monitor to save power and leave the DVR running for a week on a battery.  It will record only when bats visit the bat house using the motion detection feature, with a visible timestamp!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"style411\"\u003e\n\u003cspan\u003e\u003c\/span\u003eBase BatCam System Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4.3'' SD Monitor\u003c\/li\u003e\n\u003cli\u003e(1) BatCam with Sony CCD and built in IR lights,\u003c\/li\u003e\n\u003cli\u003e(1) 100' Camera Cable w\/ (2) BNC to RCA couplers\u003c\/li\u003e\n\u003cli\u003e(2) 12v power injector\u003c\/li\u003e\n\u003cli\u003eAC wall adapter, will run entire system\u003c\/li\u003e\n\u003cli\u003e(1) Micro DVR records to an SD card\u003c\/li\u003e\n\u003cli\u003e(2) RCA couplers required to use DVR and Monitor simultaneously\u003c\/li\u003e\n\u003cli\u003e(1) SDHC 32GB SD memory card\u003c\/li\u003e\n\u003cli\u003e(1) Roll electrical tape for temporary camera attachment to poles, etc.\u003c\/li\u003e\n\u003cli\u003e(1) Carry case suitable for field deployments\u003c\/li\u003e\n\u003cli\u003eDoes not include bats!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional 12v Power Kit:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 12v, 13 aHr SLA battery with female auto plug, for remote use and will run the entire system. \u003cem\u003eDoes NOT include a 12v charger.\u003c\/em\u003e If you require a 12v charger we recommend either the \u003ca href=\"https:\/\/batmanagement.com\/collections\/lights-and-cameras\/products\/6v-battery-tender-charger\" title=\"Battery Tender 12v Charger\"\u003eBattery Tender\u003c\/a\u003e or \u003ca href=\"https:\/\/batmanagement.com\/collections\/lights-and-cameras\/products\/12v-battery-charger\" title=\"Xciter 6\/12v Charger\"\u003eXciter\u003c\/a\u003e and add to your cart separately. \u003c\/li\u003e\n\u003cli\u003e(1) 12v camera\/DVR\/monitor power cable, terminating in an 12v auto plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCamera Mounting Suggestion\u003c\/h3\u003e\n\u003cp\u003eThe BatCam is small enough to easily fit between the 3\/4'' wide roost crevices of any typical modern bat house. The idea is to mount the camera horizontally on a thin pole and insert it into the bat house between the baffles until it reaches the roof. All BCM bat houses ever made contain an important \"attic space\" between the roof and the start of the baffles, which allows bats to change baffles and young pups sit on the tops of the baffles. This is ideally where the BatCam might be positioned as it will look out across the top of all the baffles. The pole allows the camera to be turned and positioned precisely where needed. Alternately the BatCam might be more permenantly installed without a pole by creative homeowners. \u003ca href=\"https:\/\/batmanagement.com\/products\/acoustic-microphone-mast\" title=\"Microphone \u0026amp; BatCam Mast\"\u003eBCM's Acoustic Microphone\/BatCam Mast\u003c\/a\u003e comes in two sizes, 20' and 6.5' which is perfectly suited for a BatCam mount and easily fits between the roost baffles of any open-bottom bat house. The 20' pole in particular can be placed on the ground and telescoped to exactly the height needed in many typical bat house installs. For bat houses higher then 20', the Mast may be positioned and then simply lashed to a pole that is supporting the bat house. Please \u003ca href=\"https:\/\/batmanagement.com\/products\/acoustic-microphone-mast\"\u003eadd the Acoustic Microphone\/BatCam Mast to your cart separately\u003c\/a\u003e if you need this mounting solution. \u003c\/p\u003e\n\u003ch3\u003eAdditional info:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe camera resolution is 512x492 effective pixels and 1000 lines resolution. The camera measures only 5\/16'' in diameter, smaller than any crevice a bat will fit! We specifically found a camera which also focuses closer than others tested in simulated roost crevices (most small \"spy\" cameras do not focus close enough for our purposes). Relatively sharp images can be obtained as close as 2'' and maintains a good depth of field. The camera is not waterproof. The IR LEDs heat the camera and will prevent moisture problems from dew, but this camera should be protected from rain and not immersed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe DVR records MPEG-4 video and MP3 audio at SD resolution of 704x576 with \u003cspan\u003e5\/15\/30fps options.\u003c\/span\u003e The DVR can record snapshots, record only when motion is detected, on a schedule, or can record continuously. A 32 GB SD card can record 7-8 days continuously, then overwrites the oldest recordings. With motion detection turned on and intermittent triggers this turns into a camera trap as long as the power can be supplied. Time stamps can be turned on or off. Low power-consumption, 1W when standby, 2W when recording. AV-IN and AV-OUT directly connects with camera, TV, or monitor with RCA video ports. DVR I\u003cspan\u003encludes an IR remote control for easy setting adjustment such as resolution, video quality, volume, timer functions, etc. and immediately goes into record mode as soon as power is applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAudio recording by the built in camera microphone is acoustic (not ultrasonic) and will include audible bat sounds, but these recordings are not for use with bat call analysis software. The built in microphone is unreliable and may produce poor recordings. If audio is desired, an additional microphone may be added in-line. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"style498\" style=\"text-align: center;\"\u003e\u003cem\u003e\u003cspan style=\"color: #38761d;\"\u003eAvailable In Stock, Usually Ships 3-5 Days\u003c\/span\u003e\u003c\/em\u003e\u003c\/h2\u003e","published_at":"2017-09-25T13:19:40-04:00","created_at":"2017-11-27T17:02:19-05:00","vendor":"Bat Conservation and Management, Inc.","type":"Lights \u0026 Cameras","tags":["Cameras","Infrared Lights"],"price":8900,"price_min":8900,"price_max":29900,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":4835833118747,"title":"12v BatCam Power Kit Only","option1":"12v BatCam Power Kit Only","option2":null,"option3":null,"sku":"BatCam-PK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BatCam 12v Power Kit - 12v BatCam Power Kit Only","public_title":"12v BatCam Power Kit Only","options":["12v BatCam Power Kit Only"],"price":8900,"weight":3629,"compare_at_price":null,"inventory_quantity":1000,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":4835833053211,"title":"BatCam Monitoring Kit + 12v Power Kit","option1":"BatCam Monitoring Kit + 12v Power Kit","option2":null,"option3":null,"sku":"BatCam-MK+12VPK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BatCam 12v Power Kit - BatCam Monitoring Kit + 12v Power Kit","public_title":"BatCam Monitoring Kit + 12v Power Kit","options":["BatCam Monitoring Kit + 12v Power Kit"],"price":29900,"weight":3629,"compare_at_price":null,"inventory_quantity":1000,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":4835833085979,"title":"BatCam Monitoring Kit Only","option1":"BatCam Monitoring Kit Only","option2":null,"option3":null,"sku":"BatCam-MK","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BatCam 12v Power Kit - BatCam Monitoring Kit Only","public_title":"BatCam Monitoring Kit Only","options":["BatCam Monitoring Kit Only"],"price":24900,"weight":3629,"compare_at_price":null,"inventory_quantity":1000,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/BatCamPower_b135848b-c565-4e63-8dbe-11ea7968ffbd.jpeg?v=1511820384"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2378\/9221\/products\/BatCamPower_b135848b-c565-4e63-8dbe-11ea7968ffbd.jpeg?v=1511820384","options":["Choose the variation that best suits you . . ."],"content":"\u003cp class=\"style411\"\u003e This relatively inexpensive kit includes everything you need to spy on bats in your bat house (or any other critter in crevices or nest boxes) from over 100' away!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWatch bat activity in roost crevices\u003c\/li\u003e\n\u003cli\u003eBuilt in IR LED do not disturb bats\u003c\/li\u003e\n\u003cli\u003eCan be used to inspect any crevices to look for bats in bridges, rocks, trees \u003c\/li\u003e\n\u003cli\u003eCould be used to monitor inside bird houses, etc.\u003c\/li\u003e\n\u003cli\u003eHear audible bat calls (external mic recommended)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"style411\"\u003eOur kit contains a\u003cspan\u003e ridiculously small camera with built in infrared LEDs for illumination in total darkness. A single cable carries SD quality footage, audio, and power over 100' to a live monitor, powered by a portable 12v power supply. Add the tiny in-line DVR to record activity, only when there is movement detected inside the bat house! We've designed this system to require as few wires as possible, and also have the ability to run long term remotely on a 12v battery or a 110v wall outlet. You can disconnect the monitor to save power and leave the DVR running for a week on a battery.  It will record only when bats visit the bat house using the motion detection feature, with a visible timestamp!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"style411\"\u003e\n\u003cspan\u003e\u003c\/span\u003eBase BatCam System Includes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 4.3'' SD Monitor\u003c\/li\u003e\n\u003cli\u003e(1) BatCam with Sony CCD and built in IR lights,\u003c\/li\u003e\n\u003cli\u003e(1) 100' Camera Cable w\/ (2) BNC to RCA couplers\u003c\/li\u003e\n\u003cli\u003e(2) 12v power injector\u003c\/li\u003e\n\u003cli\u003eAC wall adapter, will run entire system\u003c\/li\u003e\n\u003cli\u003e(1) Micro DVR records to an SD card\u003c\/li\u003e\n\u003cli\u003e(2) RCA couplers required to use DVR and Monitor simultaneously\u003c\/li\u003e\n\u003cli\u003e(1) SDHC 32GB SD memory card\u003c\/li\u003e\n\u003cli\u003e(1) Roll electrical tape for temporary camera attachment to poles, etc.\u003c\/li\u003e\n\u003cli\u003e(1) Carry case suitable for field deployments\u003c\/li\u003e\n\u003cli\u003eDoes not include bats!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptional 12v Power Kit:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 12v, 13 aHr SLA battery with female auto plug, for remote use and will run the entire system. \u003cem\u003eDoes NOT include a 12v charger.\u003c\/em\u003e If you require a 12v charger we recommend either the \u003ca href=\"https:\/\/batmanagement.com\/collections\/lights-and-cameras\/products\/6v-battery-tender-charger\" title=\"Battery Tender 12v Charger\"\u003eBattery Tender\u003c\/a\u003e or \u003ca href=\"https:\/\/batmanagement.com\/collections\/lights-and-cameras\/products\/12v-battery-charger\" title=\"Xciter 6\/12v Charger\"\u003eXciter\u003c\/a\u003e and add to your cart separately. \u003c\/li\u003e\n\u003cli\u003e(1) 12v camera\/DVR\/monitor power cable, terminating in an 12v auto plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCamera Mounting Suggestion\u003c\/h3\u003e\n\u003cp\u003eThe BatCam is small enough to easily fit between the 3\/4'' wide roost crevices of any typical modern bat house. The idea is to mount the camera horizontally on a thin pole and insert it into the bat house between the baffles until it reaches the roof. All BCM bat houses ever made contain an important \"attic space\" between the roof and the start of the baffles, which allows bats to change baffles and young pups sit on the tops of the baffles. This is ideally where the BatCam might be positioned as it will look out across the top of all the baffles. The pole allows the camera to be turned and positioned precisely where needed. Alternately the BatCam might be more permenantly installed without a pole by creative homeowners. \u003ca href=\"https:\/\/batmanagement.com\/products\/acoustic-microphone-mast\" title=\"Microphone \u0026amp; BatCam Mast\"\u003eBCM's Acoustic Microphone\/BatCam Mast\u003c\/a\u003e comes in two sizes, 20' and 6.5' which is perfectly suited for a BatCam mount and easily fits between the roost baffles of any open-bottom bat house. The 20' pole in particular can be placed on the ground and telescoped to exactly the height needed in many typical bat house installs. For bat houses higher then 20', the Mast may be positioned and then simply lashed to a pole that is supporting the bat house. Please \u003ca href=\"https:\/\/batmanagement.com\/products\/acoustic-microphone-mast\"\u003eadd the Acoustic Microphone\/BatCam Mast to your cart separately\u003c\/a\u003e if you need this mounting solution. \u003c\/p\u003e\n\u003ch3\u003eAdditional info:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe camera resolution is 512x492 effective pixels and 1000 lines resolution. The camera measures only 5\/16'' in diameter, smaller than any crevice a bat will fit! We specifically found a camera which also focuses closer than others tested in simulated roost crevices (most small \"spy\" cameras do not focus close enough for our purposes). Relatively sharp images can be obtained as close as 2'' and maintains a good depth of field. The camera is not waterproof. The IR LEDs heat the camera and will prevent moisture problems from dew, but this camera should be protected from rain and not immersed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe DVR records MPEG-4 video and MP3 audio at SD resolution of 704x576 with \u003cspan\u003e5\/15\/30fps options.\u003c\/span\u003e The DVR can record snapshots, record only when motion is detected, on a schedule, or can record continuously. A 32 GB SD card can record 7-8 days continuously, then overwrites the oldest recordings. With motion detection turned on and intermittent triggers this turns into a camera trap as long as the power can be supplied. Time stamps can be turned on or off. Low power-consumption, 1W when standby, 2W when recording. AV-IN and AV-OUT directly connects with camera, TV, or monitor with RCA video ports. DVR I\u003cspan\u003encludes an IR remote control for easy setting adjustment such as resolution, video quality, volume, timer functions, etc. and immediately goes into record mode as soon as power is applied.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAudio recording by the built in camera microphone is acoustic (not ultrasonic) and will include audible bat sounds, but these recordings are not for use with bat call analysis software. The built in microphone is unreliable and may produce poor recordings. If audio is desired, an additional microphone may be added in-line. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"style498\" style=\"text-align: center;\"\u003e\u003cem\u003e\u003cspan style=\"color: #38761d;\"\u003eAvailable In Stock, Usually Ships 3-5 Days\u003c\/span\u003e\u003c\/em\u003e\u003c\/h2\u003e"}

BatCam 12v Power Kit

Product Description

 This relatively inexpensive kit includes everything you need to spy on bats in your bat house (or any other critter in crevices or nest boxes) from over 100' away!

  • Watch bat activity in roost crevices
  • Built in IR LED do not disturb bats
  • Can be used to inspect any crevices to look for bats in bridges, rocks, trees 
  • Could be used to monitor inside bird houses, etc.
  • Hear audible bat calls (external mic recommended)

Our kit contains a ridiculously small camera with built in infrared LEDs for illumination in total darkness. A single cable carries SD quality footage, audio, and power over 100' to a live monitor, powered by a portable 12v power supply. Add the tiny in-line DVR to record activity, only when there is movement detected inside the bat house! We've designed this system to require as few wires as possible, and also have the ability to run long term remotely on a 12v battery or a 110v wall outlet. You can disconnect the monitor to save power and leave the DVR running for a week on a battery.  It will record only when bats visit the bat house using the motion detection feature, with a visible timestamp!

Base BatCam System Includes:

  • (1) 4.3'' SD Monitor
  • (1) BatCam with Sony CCD and built in IR lights,
  • (1) 100' Camera Cable w/ (2) BNC to RCA couplers
  • (2) 12v power injector
  • AC wall adapter, will run entire system
  • (1) Micro DVR records to an SD card
  • (2) RCA couplers required to use DVR and Monitor simultaneously
  • (1) SDHC 32GB SD memory card
  • (1) Roll electrical tape for temporary camera attachment to poles, etc.
  • (1) Carry case suitable for field deployments
  • Does not include bats!

Optional 12v Power Kit:

  • (1) 12v, 13 aHr SLA battery with female auto plug, for remote use and will run the entire system. Does NOT include a 12v charger. If you require a 12v charger we recommend either the Battery Tender or Xciter and add to your cart separately. 
  • (1) 12v camera/DVR/monitor power cable, terminating in an 12v auto plug

 

Camera Mounting Suggestion

The BatCam is small enough to easily fit between the 3/4'' wide roost crevices of any typical modern bat house. The idea is to mount the camera horizontally on a thin pole and insert it into the bat house between the baffles until it reaches the roof. All BCM bat houses ever made contain an important "attic space" between the roof and the start of the baffles, which allows bats to change baffles and young pups sit on the tops of the baffles. This is ideally where the BatCam might be positioned as it will look out across the top of all the baffles. The pole allows the camera to be turned and positioned precisely where needed. Alternately the BatCam might be more permenantly installed without a pole by creative homeowners. BCM's Acoustic Microphone/BatCam Mast comes in two sizes, 20' and 6.5' which is perfectly suited for a BatCam mount and easily fits between the roost baffles of any open-bottom bat house. The 20' pole in particular can be placed on the ground and telescoped to exactly the height needed in many typical bat house installs. For bat houses higher then 20', the Mast may be positioned and then simply lashed to a pole that is supporting the bat house. Please add the Acoustic Microphone/BatCam Mast to your cart separately if you need this mounting solution. 

Additional info:

The camera resolution is 512x492 effective pixels and 1000 lines resolution. The camera measures only 5/16'' in diameter, smaller than any crevice a bat will fit! We specifically found a camera which also focuses closer than others tested in simulated roost crevices (most small "spy" cameras do not focus close enough for our purposes). Relatively sharp images can be obtained as close as 2'' and maintains a good depth of field. The camera is not waterproof. The IR LEDs heat the camera and will prevent moisture problems from dew, but this camera should be protected from rain and not immersed. 

The DVR records MPEG-4 video and MP3 audio at SD resolution of 704x576 with 5/15/30fps options. The DVR can record snapshots, record only when motion is detected, on a schedule, or can record continuously. A 32 GB SD card can record 7-8 days continuously, then overwrites the oldest recordings. With motion detection turned on and intermittent triggers this turns into a camera trap as long as the power can be supplied. Time stamps can be turned on or off. Low power-consumption, 1W when standby, 2W when recording. AV-IN and AV-OUT directly connects with camera, TV, or monitor with RCA video ports. DVR Includes an IR remote control for easy setting adjustment such as resolution, video quality, volume, timer functions, etc. and immediately goes into record mode as soon as power is applied.

Audio recording by the built in camera microphone is acoustic (not ultrasonic) and will include audible bat sounds, but these recordings are not for use with bat call analysis software. The built in microphone is unreliable and may produce poor recordings. If audio is desired, an additional microphone may be added in-line. 

Available In Stock, Usually Ships 3-5 Days

$89.00
Maximum quantity available reached.

"In Stock" items may ship same day to up to 3 business days after placing your order.

"Out of Stock" items may still be purchased, but realize these items may be built-to-order or we may be at the mercy of our vendors for parts of your order or product. Shipping for out of stock items may be days or weeks after placing your order. Some speciaity items may have estimated availability mentioned in their product description above.

All international orders must be paid in full via credit card or international money order before shipping.  We currently accept American Express, Visa, MasterCard and bank/wire transfers.

For international orders, any duties, tariffs or broker fees are not included in the order amount and will be collected by the shipper upon delivery. Any such fees are the responsibility of the customer. 

Please ensure the shipping address you provide can accept UPS deliveries. BCM is not responsible for any fees or delays incurred from an incorrect shipping address.

In Spanish: Todos los pedidos internacionales deben pagarse en su totalidad mediante tarjeta de crédito o giro postal internacional antes de su envío. aceptamos American Express, Visa y Mastercard.  No somos capaces de aceptar banco.

Para los pedidos internacionales, los impuestos, aranceles u honorarios de agente no están incluidos en el orden cantidad y serán recogidos por el cargador a la entrega. estas matrículas son responsabilidad del cliente.        

Por favor garantizar la dirección del envío que usted proporcione puede aceptar envíos ups. bcm no se hace responsable por el pago de honorarios o retrasos de una incorrecta dirección de envío.

What states does sales tax apply?
If you live in PA or FL, you will be charged sales tax according to your state’s sales tax rules.  Tax Exempt Businesses/Organizations: contact us to place your order (717-241-2228). Please have your tax exempt number.

What can I return?
You may return new, unopened items sold within 30 days of delivery for a full refund.

When will I get my refund?
Most refunds are fully refunded in 3-5 business days after we receive and process your return.

Does BCM do replacements?
We can only replace the exact item and version you ordered, and you are responsible to return the damaged item within 30 days. If you want to exchange for a different item, you will need to return the item and place a new order.

Pettersson D500x and M500 Bat Detectors Return and Exchange Policy
All detectors are tested by BCM staff before shipping to customers. Please contact BCM first detailing the issue you are having with the hardware and obtain a Return Authorization. Should email or phone troubleshooting fail to resolve the issue, you should send the unit in suitable packaging to BCM, with the RA number written on the packaging.

BCM will confirm the unit is defective was not abused or water damaged. BCM will replace the unit at our discretion usually within one week. Units requiring repairs may take 6-8 weeks.

Pettersson factory warranty is one year. We have such confidence in this time-tested hardware, BCM extends this warranty 4 additional years for D500x and M500 devices purchased thru BCM, for a total of a 5 year warranty from date of purchase.

D500x External Microphone Return Policy
All microphones are tested by BCM staff before shipping to customers. Please contact BCM first detailing the issue you are having with the Microphone and obtain a Return Authorization. Should email or phone troubleshooting fail to resolve the issue, you should send the unit in suitable packaging to BCM, with the RA number written on the packaging.

DOA microphones are replaced immediately at no charge. There is a $125 for refurbishing used microphones, shipped immediately if in stock.

Electronics
Electronics purchased from BCM are easily returned within 30 days of receipt of shipment. These items must be in new condition with original packaging and accessories. All bat detectors sold by BCM are supported by the device's manufacturers. In the unlikely event a detector appears to be defective, please contact the customer support network for the computer manufacturer to have it serviced under warranty. Pettersson D500x/M500 devices have specific policies, see above.

Software
Software titles purchased from BCM are easily returned within 30 days of receipt of shipment. These items must be unopened and still in their plastic wrap.

General items

Other items purchased from BCM can only be returned if:

  • The return is packaged and shipped in the original packaging.
  • The items are still in new condition.
  • You ship your return within 30 days of receipt of the original shipment.

Any returns that do not meet the above qualifications may receive a reduced refund or be returned to the purchaser. Some items may incur a restocking fee as these items must be inspected, tested, and repackaged. If a restocking fee applies it will be noted on the product information page.

Professional surveys • Artificial Roosts • Equipment

For questions regarding...
New and old orders: email Jenni
Tech questions about cameras, IR lights, bat detectors or SonoBat email John
Bat detectors, repairs, and SonoBat, email Bryan
Professional surveys, quotes, and study plans, email Todd
Bat houses, installations, and harp traps, email Daniel
Shop address: 1263 Claremont Drive • Carlisle, Pennsylvania 17015

Phone: (717) 241-ABAT (2228)
Hours: 9:30 AM-4:00 PM Eastern 

Related Products